Oreka
Oreka
Oreka
Oreka
Oreka
Oreka
Oreka
Oreka
Oreka
Oreka
Oreka
Oreka
Oreka
Oreka
Oreka
Oreka
Oreka
Oreka
Oreka
Oreka
Oreka
Oreka
Oreka
Oreka
Oreka
Oreka
Oreka
Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka
  • Load image into Gallery viewer, Oreka

Oreka

Vendor
Hui Yang F3A
Regular price
$5,200.00
Sale price
$5,200.00
Regular price
Sold out
Unit price
per 

LIMITED TIME!

Fabric covers INCLUDED! $250 Value!

Please Note: Shipping from the factory is included with the price of the model. If you would like the Designer's Touch or assembly services shipping from Bryan's shop to you is NOT included, and depending on the shipping service selected is between $150 to $300. Also note that you are not charged upon checkout. We will contact you for delivery times (typically 4 to 6 weeks) and to arrange custom details as these models are built to order.

Specifications

Design by

Christophe Paysant-Le Roux

Wing Span

1760mm

Fuselage Length

1980mm

Wing Area

57.3 dm²

Stabilizer Area

18.2 dm²

Spinner Diameter

82mm

Recommended C.G.

320mm back from the LE of wing root

Aileron Servo

Futaba BLS174sv x2 or JR
Futaba BLS3174sc x2(For GP only)

Elevator Servo

Futaba BLS173sv x2 or JR

Rudder Servo

Futaba BLS171sv x1 or JR

Empty Weight

Electric 2350g / Glow 2550g (without accessories and landing gear set)

Power System

Contra/Electric, Glow

RC System

6-8ch

Announced Date

2019-07-01

What is The Designer's Touch?

Bryan will verify alignment and fit from the factory and then apply his current, personal settings to the airplane so that you have the most up to date and perfect setup available. So what’s the big deal? Why would you pay someone else to look at your airplane? Why isn’t the airplane already perfectly setup from the factory?

  • Despite the tremendous efforts of the factory it is just prohibitively difficult and unrealistic to teach factory workers, with little to no knowledge of modeling, to consistently and accurately set incidences and verify trueness to one tenth of a degree. Despite this we are trying our hardest and the airplanes get better and better as time goes on. This is not unique to a factory — we have found gross errors in models at all price points. We are up front about that reality. While we assure you the airplane will fly great out of the box, the Designer’s Touch ensures you get the absolute best alignment from Bryan himself.
  • Bryan will make sure the fit of all the critical components meets the highest of standards — any small issue (which could become a big issue with time) with the fit of a wing tube, wing pin, stab tube, etc. is taken care of for you.
  • A personal inspection of the airplane by Bryan will eliminate any of those nasty surprises we’ve all had occasionally. An area with not quite enough glue, a chip in the paint, a small crack in the chin cowl…. all are things sometimes unavoidable. With the Designer’s Touch you have peace of mind that you won’t have to deal with such an inconvenience.

At the end of the day the Designer’s Touch is all about having that peace of mind. Your airplane will be straight; your airplane will be true; your airplane will be precisely and accurately set up; your airplane will just be right.

Assembly Services

We're now offering assembly services straight from Bryan's shop! We will install all of your equipment and deliver a ready to fly pattern ship assembled from one of the best in the world! We do not reflect the price of this service in your shopping cart as each case is unique. Please leave your email and phone number at checkout and we will contact you with details.

General overview of pricing:

  • $200 Motor installation (Glow or Electric)
  • $200 Servo installation, including control horns glued into control surfaces
  • $1000 Complete build, ready to fly (Only able to program servos with futaba radio systems)
  • $1500 Complete build, airplane flown and trimmed to Bryan's satisfaction; includes a day of coaching if you can meet Bryan in Baton Rouge for pickup